Pete and I spent the second weekend in May putting up the last of the vapor barrier and starting on the tongue and groove. It’s so satisfying to see the tongue and groove go up; things are really starting to come together.
The trickiest part of the vapor barrier was the sleeping loft and of course we left that for last. By the time we finished with the vapor barrier we jumped right in to the tongue and groove. We started at the easiest location, the wall behind the future couch. When we were finished with that we moved on to the ceiling in the sleeping loft. We were trying to work on areas that wouldn’t have any seams because our chop saw can’t do the cuts we wanted for seams. Instead, we would be borrowing my coworker Brian’s miter saw the following weekend. We borrowed this same saw when we put up the exterior cedar siding. When we finished with the ceiling in the sleeping loft we put up plywood in the kitchen area. Not only does this save us a few bucks but the metal plates covering the gas lines keeps us from being able to nail the three-inch wide cedar boards to parts of the wall. The following weekend we continued to make progress with the tongue groove.